Our 5D Diamond Walkthrough

This is our walkthrough of how to start on your own 5D Diamond painting experience. It is a fairly straightforward hobby, but it can help to have some guidance to start. Take some time, browse through the measures, and get an summary of the whole procedure!

-Setup-

Step 1. Purchase your kit

Most kits will contain the following: a pre-printed canvas, flat-backed diamonds, a tray, a pen-like instrument, and a packet of gel or wax.

Kit’s typically include either square or round diamond contours. A painting branded”complete drill” is a whole covered canvas of diamonds,”half drill” indicates that there are sections of the painting without diamonds.

Review your graph and legend completely before starting. The bundles of paint with diamonds are labeled with the colour name or number, but it may help to also label the bag with all the emblem used for that color. This will help you quickly identify the right color as you work.

Measure 2. Understand how to read the picture

The canvas consists of small boxes which are painted and painted with numbers, similar to a cross-stitch canvas. Each number corresponds to a diamond colour.

The numbers are written on a chart, together with the corresponding bag and diamond color written below or next to it. The graph is typically printed on the face of the picture. In this image, the tote number is 15 – The color number is 720 – and the graph says 720 is a orange O!

Some squares can have a letter or symbol instead; treat this as a number.

—–
Measure 3. Unroll the tape and paper it down to a flat surface

If the canvas won’t lay flat, roll it back the other way, then unroll it.

This project can be time-consuming. Consider taping the canvas to a board, which you are able to move out of the way easily.

Step 4. Run your fingernail along the plastic to crease it that it does not roll forward.

Some kits come with pre-cut plastic strips. In cases like this, simply peel off the very first strip away.

Step 5. Pour out your first crystal color into the tray.

Opt for a box to start with, and notice the amount in it. Look up the number on the chart, then find the tote with the same number. Open the bag, and then pour out some of the crystals onto the menu which came with your kit.

Some kits include multiple trays. You are able to use the other trays for the other colors in that area.

-Applying the diamonds-

Step 1. Dip your pen tool into the wax or gel that came with your kit.

Open the package of gel that came with your kit.

Some kits come with a unique wax pencil that you have to sharpen rather. In cases like this, sharpen the pencil using a pencil sharpener.
Some pens are going to have vast end also, which you can use to pick up to three crystals at one time.

—–
Measure 2. Use the pencil to pick up a crystal.

Gently press the tip of the pencil against the top, faceted part of the crystal. Lift the pen away in the tray; the crystal ought to be stuck into it.

Maintain the tray just below the edge of the canvas; this is going to make it easier to get.

—–
Step 3. Gently press the crystal against the square square.

Pull away the pencil; the crystal ought to be stick against the canvas. If you are just beginning, it might be a good idea to press lightly at first. This way, if the crystal is off-set, then you can nudge it back into position, then press down on it to secure it.

That is precisely like painting by quantity, except that you’re using crystals rather.

—–
Step 4. Fill the rest of the squares in that area.

Work one colour at a time and refill the pen with gel as needed. When you finish filling in all the squares with the same number code, proceed onto the next color. This will allow you to work faster and remain organized.

Avoid resting your hands on the canvas; the more you touch the surface, the less tacky it will end up.

—–
Measure 5. Peel away more of the plastic covering, and then fill in more squares.

Continue filling the canvas in using the same technique as before. Function in 1 to 2-inch (2.54 to 5.08-centimeter) wide segments, one color at one time. When you completely fill in a section, move onto another one.

Don’t peel off the whole plastic covering away, or the glue on the canvas will probably get dirty and lose its tack.

Finishing your work

Measure 1. Cover the canvas with the plastic sheet that it arrived with.

If you discarded the sheet, you can pay for it with a bit of paper or parchment paper; avoid using wax paper.

Step 2. Go over the canvas using a rolling pin.

This may press down any loose diamonds and then fasten them. If you do not have a rolling pin, you may use a can or jar instead. You can also gently rub on the canvas with your hands rather.

Measure 3. Stack some heavy books on top of the canvas overnight.

This will help further adhere the diamonds to the canvas and guarantee they bond properly. If you don’t have any novels large enough to cover the canvas, you can use a second flat, heavy object, such as a box or cutting board.
Measure 4. Peel the tape away.

Lift the books off first, then peel off the plastic covering off. Peel the tape in the corners of the canvas. Don’t trim the extra canvas manner, because this might cause the fabric to fray.
Measure 5. Frame the canvas.

Remove the glass in the frame first, then add the canvas to the framework. Fold the extra down edges, then set the backing into position. Leave the glass out, since it will only dull the diamonds down’ sparkle.

To get a fancier touch, place the canvas behind a mat ; this will provide the canvas an additional border within the framework. Choose a color that matches the diamonds.

Leave a Reply

Your email address will not be published. Required fields are marked *